Kyoritsu’s solar tester and meters for resistance measurement

Kyoritsu, in India, has been present for many decades, offering world class products optimised for Indian needs at ‘just the right prices’. Their instrument is useful to solar industries application such as insulation resistance, Earth ground tester, AC/DC clamp meter and digital multimeter.

Kyoritsu 3125A insulation resistance tester
Application: Insulation resistance tester is useful to measure resistance of PV solar cell panel and cable also.

• It can measures Insulation Resistance up to 1TΩ.
• Short-Circuit Current up to 1.5mA
• Auto Discharge function
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR, Large display with Bar Graph indication and backlight and live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600V

Kyoritsu 4105A-H Earth ground tester
Application: Earth ground tester is useful to measurement of earth system with the help of 2Pole, 3pole method for solar panel installation.

• It can measure earth resistance range up to 2000Ω with Accuracy of ±2%rdg±3dgt.
• Measurement of 2pole, 3 pole earth resistance method.
• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test. It comes with hard carry case including accessories.
• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
• Designed to meet IEC 61010-1 safety standard.
• Capable of measuring earth voltage.

Kyoritsu 2056R AC DC Clamp meter
Application: Clamp meter is useful to measure AC DC current and voltage of solar PV systems.

Advertising

Kyoritsu 1051 Digital multimeter
Application: Digital Multimeter is useful to measure DC current and voltage and continuity of solar PV systems.

• It can measure AC DC voltage up to 1000V and AC DC Current up to 10A. True RMS enables an accurate measurement.
• It can also measurement of Resistance, Capacitance test, Continuity, Frequency, Temperature, Diode test, Data Hold, , MIN-MAX, REL Function, Filter Function, Auto power OFF.
• 09% basic DC accuracy, large display with 6,000 counts, Low-pass filter for motor drive measurements, User calibration function, Terminal shutter to prevent incorrect test leads’ insertion in current terminals.
• Complies with IEC 61010-1 CAT IV 600V , CAT III 1000V

Kyoritsu Products are readily available in India & have complete Service & Calibration Support Setup too.

For more details,
contact:
Kyoritsu KEW India Instruments Pvt. Ltd.
#4, S P Nagar, Navrangpura
Ahmedabad-380006.
T: 91 79-2640 9686
M 0 98246 80404
E : info.epr@kew-india.co.in
W: www.kew-ltd.co.in