MECO Inverter Analyser for power diagnostic

MECO Inverter Analyzer (Model: IA-S)  is suitable to check all inverter products. It can be used to analyze the fault in Air Conditioners (ACs), Refrigerators etc. It helps to diagnose whether there is a Compressor failure or a PCB failure.

Features

• Helps to Diagnose Faults in Inverter Based Products
• 60 – 600V AC, 40 – 400Hz (Max. for 5 minutes)
• No Battery Required
• Rugged, Handy, Easy and Safe to Use
• Color Identified Test Probes with Insulated Crocodile Clips for R, Y, and B Connections
• LED Based Instant Diagnosis

Working

In case of a breakdown,

Step 1: Turn the power off.

Step 2: Remove the connections between the Compressor and PCB.

Step 3: Check and ensure that the charged voltage of the built-in smoothening electrolytic capacitor drops to < 10V DC or below while carrying out any service.

Step 4: Connect the Inverter Analyzer instead of the Compressor by connecting the fast-on terminals of the PCB to the Crocodile Clips of the Inverter Analyzer (R, Y, and B respectively). Be careful not to touch the Crocodile Clips (R, Y, B) with each other.

Step 5: Turn the power on and operate the A.C. or Refrigerator.

Step 6 (Diagnosis): When all LEDs of the Inverter Analyzer are lit uniformly, it means the PCB is proper and the Compressor is faulty. When any / all LEDs are not uniformly lit, it means there is a fault in the PCB.

Step 7: On completion of diagnosis, be sure to switch off the power. Then remove the connections of the Crocodile Clips of the Inverter Analyzer. Re-connect the fasten terminals of the PCB to Compressor firmly. Loose connections may lead to the burning of the terminals.

For details, please visit: www.mecoinst.com

Email: sales@mecoinst.com